These SHS newest generation CNC finished steel gears are great bang for your buck! I have been using these in wide range of builds since they released first generation in 2009-2010?
They had some quality issues in Gen. 2 and 3 but these newest ones are like gen. 4.
This Gear Set has a ratio of 18.72:1 and common naming is 18:1 stock ratio gears. Gearset speed is at the same speed as most stock gears, so it gives you a same performance as most stock gearsets.
Add an 9 teeth bevel to this set and you get nice set of 20:1 gears!
These gears are great tuneup for performance buck and base for DSG and Torque builds. They are really cheap and I can fully recommend. I have had these in M170 DSG and M150 SSG guns they have been holding nicely.
These are still ACM gears and sometimes you can win ACM lottery.
Add an 9 teeth bevel to this set and you get nice set of 20:1 gears!
These gears are great tuneup for performance buck and base for DSG and Torque builds. They are really cheap and I can fully recommend. I have had these in M170 DSG and M150 SSG guns they have been holding nicely.
These are still ACM gears and sometimes you can win ACM lottery.
I found these cheaply from Airsoft Peak (Shop that I mostly use to get my ACM parts)
SHS Torque Up High Speed Flat Gear Set 18:1 for Gearbox V2/3
Bevel Gear
MIM Machined with black oxide coating and filled shaft. Standard 10-teeth design
Step Gear
Sector and Step gears are fully CNC machined so reability goes sky high!
Sector Gear, remember to tighten and locktite those small screws!
cool, seems really nice.
ReplyDelete